PROTECTION VARNISHES FOR THE TOP SURFACE 36 Two-component, aliphatic polyurethane-based, water-soluble and odorless matte varnish. It presents exceptional hardness, high abrasion resistance, and durability against UV radiation. It does not yellow, even after several years from its application. Its application will preserve the colors and shades of microcement and microcement in paste form as well as natural stones. Consumption: • For microcement in paste form: 1kg/ 8-10m2 for two coats. • For microcement: 1kg/5-7m2 per coat. • For natural stones: 1kg/7-8m2 per coat. Depending on their absorbency, on properly prepared surfaces. Packaging: 1kg (A+B) & 3kg (A+B) DECOFIN AQUA PU Two-component, water-soluble polyurethane varnish with matte finish Two-component and clear waterborne epoxy varnish with satin finish. A low-odor product that dries quickly and creates a hard, non-absorbent, and stain-free surface. It adheres excellently to absorbent and non-absorbent substrates and is highly resistant to abrasion, as well as to contact with acids, alkalis, oils, cleaners, and chemicals. Suitable for interior spaces decorated with cementitious microcement and microcement in paste form. Consumption: 100-200gr/m2 per coat, depending on the absorbency of the surface. Packaging: 4kg (A+B) DECOFIN EPOXY AQUA Two-component epoxy varnish with satin finish for the waterproofing and protection of interior surfaces High-strength, two-component epoxy varnish with gloss finish, without solvents. Highly resistant to abrasion, acids and alkalis as well as chlorinated and salt (sea) water. It creates a hard, non-absorbent and completely sealed surface. Ideal for applications in swimming pools, fountains, kitchen countertops and commercial kitchens, catering halls, restaurants, hotels, entertainment venues, etc. Protects and highlights the decorative stone carpets QUARTZ DECO indoors, as well as bathrooms, showers and swimming pools. Due to its exceptional surface hardness, it is suitable for floors with ‘high demands’ in mechanical and chemical resistances. The addition of ANTISLIP ADDITIVE POWDER, at a rate of 2% to 4% by weight of the liquid varnish, gives an antislip top surface to the coated floors. Consumption: 200-300gr/ m2 per coat, depending on the absorbency of the surface. Packaging: 750gr (A+B) & 5kg (A+B) DECOFIN EPOXY SF Two-component epoxy varnish with gloss finish for microcement and natural stones Epoxy varnishes do not promote bacteria growth and are suitable for areas where strict implementation and compliance with hygiene rules is paramount.
RkJQdWJsaXNoZXIy MTk0OTg2