Useful tools in the right professional hands DUROSTICK provides reliable and quality solutions by combining certified products with modern tool kits. The construction professional has at his disposal effective application methods that facilitate and upgrade his work. With the use of the LOUTIL PARFAIT DECOLISS kit and the special-purpose DUROSTICK Styling Roller, the application becomes an extremely easy task. Products such as DS-259 DECO MICRO RESIN, DS-256 FLEX VELVET, DS-258 DECO MICRO FLEX, POWDER COAT, STUCOFIX-P, STUCOFIX ELASTIC PUTTY, dB BLOCK are easily and efficiently applied in a short time in vertical and horizontal surfaces even on ceilings without the use of ladders or scaffolding. You can get the DECOLISS kit through the DUROSTICK points collection system. 33 If you desire to color the microcement in its mass, then, to the metered water amount, add the water-soluble pigments in powder form DUROCOLOR POWDER-C and mix thoroughly (3-4 minutes). In the colored water add the chosen type (only) white microcement. Mix with a low-rpm electric drill to homogenize the color and the microcement and create a colored, pasty mass, that is ready for use. Caution: For each microcement bag you mix, you should follow the same water -DUROCOLOR POWDER-C pigment recipe. The DUROCOLOR POWDER-C color creation system consists of preweighted bags of water-soluble pigments in powder form. The available colors are white and 48 more, in 250gr packages. Depending on the recipe (1 or 3 pigment bags), they yield 96 color chart colors. Quantities over 250kg can be delivered factory colored in any available color from the DUROCOLOR POWDER-C color chart (special order, at a pre-agreed cost). Coloring the microcement in paste form The microcement in paste form DS-258 DECO MICRO FLEX, is available in 3 colors, White, Light and Dark Gray. The white microcement in paste form of DUROSTICK, is colored and styled in 120 colors with the measuring system for shade rendering DUROCOLOR (available in 20ml syringes). Coloring microcements Expansion joints Depending on the size, shape, and location (interior or exterior surface) where the microcement will be applied, it is necessary to create expansion joints. Expansion joints protect the coating from future cracking that usually comes from the expansions and contractions of the surfaces and the micro-vibrations of the soil. The joints are created around the perimeter, where the horizontal surfaces meet the vertical ones. Also, they are created in continuation of existing ones (followed through the new coating when applying over existing expansion joints), or anew, per 25-30 square meters of the coated surface. Fill the joints with the polyurethane sealant DUROFLEXPU. It seals effectively and due to its high flexibility, it ensures the absorption of expansions and contractions of the coated surfaces. Scan & See video of their use! Technical support Take advantage of our ability to provide you with sound advice, but also of solving technical issues that we offer you, through our Technical Support at +30 210 55 16 500 or at technical@durostick.com Watch application videos on DUROSTICK’s YouTube channel.
RkJQdWJsaXNoZXIy MTk0OTg2