e of MS POLYMER technology R GLUE also any individual who deals with DIY, by using MS POLYMER POWER GLUE, achieve instant, watertight, excellent seals and bonds, without nails and screws. It is applied indoors and outdoors. W e How is it applied? The surfaces to be bonded have to be clean, free from loose sections, dust, grease, oils etc. It is highly recommended to apply MS-POLYMER POWER GLUE using the highly durable, heavy duty PROFESSIONAL CARTRIDGE GUN of DUROSTICK. Apply the material in parallel lines, spaced 3-5cm from each other. Join the surfaces to be bonded before any surface film occurs on the product. Avoid exercising any detachment type strength on the bonded piece(s) within the first 24 hours. How is it cleaned? While the product is fresh, it can be cleaned with gasoline. Once the product is fully cured and hardened, it can only be removed by mechanical means. Clean hands with soap and water, immediately after use. Limitation of use: Not suitable for adhering PE, PP and is not recommended for permanent exposure to water. PACKAGING: Cartridge of 290ml, blister of 80ml CONSUMPTION: Depending on the application • Polymerization rate: 3mm/day • SHORE A hardness (ISO 868): 65 • Elongation at break: 380% per DIN 53504 • Modulus 100%: 1,55Ν/mm2 per DIN 53504 • Tensile strength: 2,65Ν/mm2 per DIN 53504
RkJQdWJsaXNoZXIy MTk0OTg2