hydrostop-pu_0323_eng

It is not affected by UV radiation (chalking). UV Resists the corrosive gases in the atmosphere as well as chlorides, carbon dioxide and sulfur oxides. Excellent resistance to the creation of mold and algae. mold Use 1. Preparation of new surfaces: Using a roofing scraper or a wide chisel, remove all deteriorated sections, if any. Continue by using a hard, street type, broom. If any moss, lichen or grease stains are present, remove them by using D-95 CLEANER of DUROSTICK or a bleach-water solution at a dilution ratio of 1:1. Scrub the surface thoroughly and rinse with plenty of clean water. Surfaces to be waterproofed must be dry and should not get wet for the next 48 hours, in order to avoid surface moisture from being trapped. 2. Preparation of surfaces coated with waterproofing product(s): • Detached torch-down roofing materials: Remove them using a wide roofing scraper or roofing torch. • Well adhered existing torch-down roofing materials, it is required to thoroughly remove all the dust from their surface and to seal any detached sections (if needed). • Detached or deteriorated elastomeric waterproofers, have to be removed using a wide roofing scraper or a razor blade. • Detached elastomeric materials that are not visible, can be found using a garden

RkJQdWJsaXNoZXIy MTk0OTg2