building? maintaining? repairing? renovating? the solutions are here!


Microcement for walls and floors

Reinforced, white or colored cement mortar. Its composition contains high-strength cement, properly graded aggregates, special active additives and resins that give the material unbreakable adhesion to the substrate, excellent workability and a perfect top surface with high mechanical resistance.
The decorative microcement DS-250 of DUROSTICK is recommended for use on new or existing floors and walls, both indoors and out. Recommended for application on horizontal and vertical surfaces. It is exceptional for applications on surfaces made of concrete, plaster, gypsum board and cement board, and a wide range of other substrates. All substrates have to be appropriately prepared and well anchored. The addition of the polymer resin DUROSTICK RESIN POWDER into the product increases its adhesion to the substrate and the abrasion resistance.
Add DUROCOLOR POWDER-C, the water soluble pigments coated with vinyl resins available in powder form. They will color the product throughout its mass (alternatively, broadcast and ‘work’ the pigments onto the surface), thus creating 96 permanent colors. As another means of coloring DS-250 use the cementitious GROUTS of DUROSTICK, available in 32 colors, or the color syringes of DUROCOLOR coloring system of DUROSTICK, to create your own personalized, one-of-a-kind style on the surface of the microcement.
Quantities over 250kg that can line approximately 35m² can be delivered factory colored in any available shade from the DUROCOLOR POWDER-C 96 shade chart (upon request, at a pre-agreed cost).
Classified PCC R2 per EN 1504-3.



7kg/m² per 5mm thick coat




White & 7 more colors (light gray, dark gray, aqua marine, alabaster, sun ray, pistachio)